Everything you need for perfectly clean, clear and easy-clean glass and ceramics that lasts for years!

Just wipe on and in minutes you've got easy-clean, non-stick glass or toilet!

Ideal for showers, windscreens, and exterior glass where an easy clean and non-stain surface is desired.  Ideal for ceramic tiles and toilets as well.

Kit includes specially designed glass polish to remove most hard water stains and water spots, and enough glass treatment to up to 3 square metres of glass.  If your glass is heavily stained add CL40X to your order to easily remove those really tough hard water stains.

Showers and household glass:

• Long term nano-coating keeps surface easy-clean and non-stick for years under normal conditions
• Hard water and salt deposits won't stick to surface, so a simple rinse and wipe is all that's needed to keep it sparkling
• Oils and grime won't stick to the surface so they are easily removed
• Durable coating is not affected by UV or normal household chemicals
• High heat tolerance so ideal around the kitchen
• Salt deposits for sea air wash away with rain or water
  

Toilets:

•  

   Prevent unsightly stains
• "stuff" doesn't stick

Windscreens:

• Improves visibility in wet conditions
• Glass remains clean with simple wipe of the blades
• Anti-dust component prevents dust and dirt from sticking to surface
  
• 85% function after 80,000 wipes
  
• Can be re-applied as needed
  
• Hard water and salt deposits won't stick to surface, so a simple rinse and wipe is all that's needed to keep it sparkling
• Oils and grime won't stick to the surface so they are easily removed
• Durable coating is not affected by UV or normal household chemicals

Directions:  Clean surface, removing any dirt, film or oil.  For hard to remove stains use CL40X.  For very difficult stains apply CL40X with 1200 grit sanding pad or 4x0 steel wool.  Polish the surface with CL50 surface preparation towellet provided, using small circular motions.  Wipe clean with a dry cloth.  Then apply glass treatment in the same manner.  Be sure to cover the entire surface.  Let dry for 2-3 minutes, and then buff with a clean, dry cloth to remove any residual haze.  Your surface is protected against water stains!  While it can be exposed to water without damaging the treatment, thorough curing takes 24 hours. 

For test results click here.

Test Results